For professional use · Aqua Purify PRO · Available on quotation
Professional reverse osmosis for salinity up to 6,000 ppm
The Kinetico Purecleer COMPACT L series is designed for professional and industrial projects requiring direct-flow reverse osmosis. With maximum feedwater salinity of 6,000 ppm, it offers a higher salinity limit than the COMPACT HL series for technical assessment. Three variants, L 380, L 760 and L 1150, use two, four and six 4040 membranes respectively. Salt rejection is 99%, with recovery adjustable up to 75%. Electronic pump control and a common frame size complete the series. AquaPurify offers these systems on quotation, with selection based on the required production, feedwater characteristics and the constraints of the installation.
Series highlights
- Maximum feedwater salinity of 6,000 ppm across all three models.
- Three variants with hourly outputs of 380, 760 and 1,150 L/h.
- Two, four or six 4040 membranes, with salt rejection of 99%.
- Recovery adjustable up to 75% and electronic pump control.
- Common dimensions of 1,682 × 640 × 634 mm to support comparison during layout planning.
Choosing a model
Choose from COMPACT L 380 / 239505, COMPACT L 760 / 239506 and COMPACT L 1150 / 239507, with hourly outputs of 380, 760 and 1,150 L/h respectively. L 380 and L 760 use 1/2 inch BSP permeate and reject connections; L 1150 uses 1 inch BSP. Compare site demand, salinity and the manufacturer’s daily production figures.
Technical specifications by model
Manufacturer technical specifications. The 24-hour volume corresponds to 24 hours of production at the indicated hourly flow rate.| Specification | COMPACT L 380 | COMPACT L 760 | COMPACT L 1150 |
|---|
| Manufacturer reference | 239505 | 239506 | 239507 |
|---|
| Technology | Direct-flow reverse osmosis | Direct-flow reverse osmosis | Direct-flow reverse osmosis |
|---|
| Maximum feedwater salinity (ppm) | 6,000 ppm | 6,000 ppm | 6,000 ppm |
|---|
| Production flow rate (L/h) | 380 L/h | 760 L/h | 1,150 L/h |
|---|
| 24-hour production volume (L) | 9,120 L/24 h | 18,240 L/24 h | 27,600 L/24 h |
|---|
| Membranes | 2 × 4040 | 4 × 4040 | 6 × 4040 |
|---|
| Salt rejection (%) | 99 % | 99 % | 99 % |
|---|
| Recovery rate | Adjustable up to 75% | Adjustable up to 75% | Adjustable up to 75% |
|---|
| Maximum operating pressure (kg/cm²) | 19 kg/cm² | 19 kg/cm² | 19 kg/cm² |
|---|
| Minimum dynamic inlet pressure (kg/cm²) | 2 kg/cm² | 2 kg/cm² | 2 kg/cm² |
|---|
| Feedwater temperature (°C) | 3–35 °C | 3–35 °C | 3–35 °C |
|---|
| Feedwater pH | 3–11 | 3–11 | 3–11 |
|---|
| Feedwater chlorine (ppm) | < 0.1 ppm | < 0.1 ppm | < 0.1 ppm |
|---|
| Installed power (kW) | 2.2 kW | 2.2 kW | 2.2 kW |
|---|
| Electronic pump control | Yes | Yes | Yes |
|---|
| Feedwater connection | 1″ BSP female | 1″ BSP female | 1″ BSP female |
|---|
| Permeate connection | ½″ BSP | ½″ BSP | 1″ BSP |
|---|
| Reject connection | ½″ BSP | ½″ BSP | 1″ BSP |
|---|
| Dimensions H × W × D (mm) | 1,682 × 640 × 634 mm | 1,682 × 640 × 634 mm | 1,682 × 640 × 634 mm |
|---|
Preparing your installation
Selection begins with feedwater analysis, salinity and the required production volumes. The 6,000 ppm limit must be considered alongside other parameters, including chlorine, pH and temperature. Provide a minimum dynamic inlet pressure of 2 kg/cm² and capacity for the 2.2 kW installed load. The inlet connection is 1 inch BSP female; permeate and reject connections vary by model. Drainage, maintenance access and any necessary pretreatment or associated equipment must be specified before ordering.
Maintenance and monitoring
Monitoring should reflect water composition, usage and the manufacturer’s instructions for the delivered model. It should cover pressures and flows, produced water quality, recovery settings, pump operation and membrane condition. Connections and associated equipment also require inspection. Service work and replacements are determined by actual operating conditions.
Optional accessory
The Purecleer blending kit, reference 239504, is an accessory to assess as part of the project. It is not included in the base supply described on this page. Its suitability, compatibility and any addition to the order must be confirmed in the quotation.
Technical documentation
Download the data sheet — PDF in English
Visit the manufacturer’s page
Frequently asked questions
How does COMPACT L differ from COMPACT HL?
COMPACT L has a maximum feedwater salinity of 6,000 ppm, compared with 3,500 ppm for COMPACT HL. It comprises three models with outputs of 380, 760 and 1,150 L/h. Selection depends on water analysis and required production, rather than flow alone.
Which models are included in the COMPACT L series?
COMPACT L 380 produces 380 L/h with two 4040 membranes; L 760 produces 760 L/h with four membranes; L 1150 produces 1,150 L/h with six membranes. L 1150 has 1 inch BSP permeate and reject connections, compared with 1/2 inch BSP on the other two models.
Are accessories and installation included?
The scope of supply is defined in your quotation. Blending kit 239504 is presented as an optional accessory to assess. Any pretreatment, connections, associated equipment and services depend on the project and must be detailed in the offer.
Available on quotation
Your quotation specifies the model, scope of supply, availability and delivery lead time.
Request a quotation